ProperLoading
Preparation for loading
It is not necessary to rinse dishes before putting them into the dishwasher. Just remove large pieces, bones and other hard items. The POWER CLEAN’” Module will remove food particles from the water, It contains a chopping devrce which will reduce the size of food items.
If hard items such as fruit seeds, nuts and egg shells enter the POWER CLEAN Module, you might hear chopping, grinding, crunching or buzz- ing sounds. Those sounds are normal when hard items enter the module. Do not let metallic items (i.e. pot handle screws) get into the POWER CLEAN Module. This could result in damage to the POWER CLEAN Module.
Always load dishes so soiled surfaces are reached by spray from rotating spray arms. Water must be able to drain off completely for best drying results. Be careful to separate items so spray can reach all surfaces.
Top rack loading
The top rack 1sdesrgned for cups, glasses and smaller Items
Cup and glass load
l Place so open ends face down for cleaning and draining
l Load glasses in top rack only. Bottom rack IS not desrgned for glasses. Damage may occur.
. Place items in the rows between prongs. Plac- ing them over the prongs can lead to breakage.
l Be sure lightwerght items are held firmly in place.
l China, crystal and other delicate items must not touch each other during drshwasher operation. Damage may occur.
Cup and glass load
Mixed load
. Load plastic items only in the top rack. Only plastrc items marked “dishwasher safe” are recommended.
l Load plastrc items so the force of the spray does not move them during the cycle.
l Plastic Items can be melted in the bottom rack.
Utensil load
l Small bowls, pans and other utensrls can be placed In the top rack
Mixed load
9
