/
Cycle Control Knob
Selecting a cycle
HEAVY WASH Cycle
A double wash for heavily soiled loads. Cycle time is about 60 minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 55 minutes.
RINSE 81HOLD Cycle
For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.
Use AIR DRY only.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the dishwasher is heated during the “dry” part of the cycle.
If the AIR DRY Option is selected, air in the dishwasher is not heated. The Control Knob will keep moving clockwise until it stops at HEAVY WASH. If you open the door to let
To add a dish after starting
1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed NORMAL WASH.
2.Unlatch the door to stop the cycle, but don’t open it until the spray arms stop spinning.
3.Open the door and add the dish.
steam escape and leave it unlatched, the Control Knob will not keep moving. Push in the Control Knob and turn clockwise to OFF.
Using the AIR DRY Option helps save energy, but dishes take longer to dry [overnight] and some water spotting may result. Some items (such as plastics) may need towel drying.
4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restart- ing the cycle.
5.Latch the door. The dishwasher will start from where it stopped.
