Rinse/Spin

Use this cycle to get a rinse and spin only. This cycle combines fast speed tumbling and extra high speed spin. If desired, you can reduce the spin speed by selecting the speed you want from the SPIN SPEED modifier.

A Rinse/Spin cycle is useful for

Loads that need rinsing only.

Adding fabric softener to a load.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want from the SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and woolens should be drained with no spin or low spin speed to avoid fabric stress.

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycle

Soil Level

Water Temp

Spin Speed

 

(cycle time)

 

 

 

 

 

 

Sanitary

Normal

Super Hot/Cold

Extra High

 

(1:55)

 

 

 

 

 

 

Whitest

Normal

Hot/Cold

Extra High

Whites

(1:00)

 

 

 

 

 

 

Heavy

Normal

Hot/Cold

Extra High

Duty

(1:15)

 

 

 

 

 

 

Normal/

Normal

Warm/Cold

High

Casual

(0:40)

 

 

 

 

 

 

Quick

Normal

Warm/Cold

Extra High

Wash

(0:40)

 

 

 

 

 

 

Delicate

Normal

Warm/Cold

Medium

 

(0:35)

 

 

 

 

 

 

Silk

Normal

Cold/Cold

No spin

 

(0:26)

 

 

 

 

 

 

Wool

Normal

Cold/Cold

Medium

 

(0:30)

 

 

 

 

 

 

Hand

Normal

Cold/Cold

Low

Washables

(0:30)

 

 

 

 

 

 

Soak

Normal

Warm/Cold

No Spin

 

(0:30)

 

 

 

 

 

 

Rinse/Spin

Normal

Cold/Cold

Extra High

 

(0:21 min.)

 

 

 

 

 

 

Drain/Spin

Normal

N/A

Extra High

 

(0:11 min.)

 

 

To change the preset cycle settings

Press the selector of each setting until the desired setting glows.

Normal Washer Sounds

As with any new product, you will hear sounds that you are not accustomed to. You may hear various sounds when the door is locked and unlocked, and during the washing, rinsing, and spinning process. Between changes in wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles. These new sounds and pauses are part of normal washer operation.

Options

You can customize your wash by adding “Options” to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all options are available with all cycles.

See the “Laundry Guide” for an overview of possible options for each Wash Cycle selection.

You can select more than one option for a cycle. Some options cannot be added to some cycles; for example, Prewash cannot be added to the Quick Wash cycle.

If an option is available with a selected cycle, the light for that option will glow when selected.

If an option is unavailable with a selected cycle, there will be a short tone, and the light for that option will not glow when selected.

Prewash

Use this option for heavily soiled loads that need pretreatment. This option adds a 15-minute prewash and drain to the main wash cycle.

NOTES:

Add detergent to the Prewash and Main Wash compartments of the Dispenser Drawer.

When using Prewash, do not use liquid detergent in the Main Wash compartment. Use powdered detergent for the main wash cycle.

NOTE: The Prewash and Auto Soak options cannot be selected in the same cycle.

14

Page 14
Image 14
Whirlpool GHW9200LQ0 manual Options