To Set a Timed Cook:

1.Press BAKE (optional).

2.Press the TEMP “up” or “down” arrow pads to enter a temperature other than the one displayed.

3.Press STOP TIME.

4.Press the HR and MIN “up” or “down” arrow pads to enter the desired time to end cooking.

5.Press START. The display will count down the time.

When the time ends, the oven will shut off automatically and “End” will appear on the display. End-of-cycle tones will sound, then, if enabled, reminder tones will sound every minute.

6.Open and close the oven door to clear the display and/or stop reminder tones.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day. See “Clock” section.

1.Press desired cook function.

2.Press the TEMP “up” or “down” arrow pads to enter a temperature other than the one displayed.

3.Press START TIME.

4.Press the HR and MIN “up” or “down” arrow pads to enter the time of day to start.

5.Press STOP TIME (optional).

6.If STOP TIME has been pressed, press the HR and MIN “up” or “down” arrow pads to enter the desired time to end cooking.

7.Press START. “DELAY” will appear on the display.

When the start time is reached, the oven will automatically turn on. When the stop time is reached (if programmed), the oven will shut off automatically and “End” will appear on the display. End-of-cycle tones will sound, then, if on, reminder tones will sound every minute.

8.Open and close the oven door to clear the display and/or stop reminder tones.

Sequence Programming

(on some models)

Sequence Programming allows you to program at one time up to four cook functions, and is usable with other electronic oven control functions, such as the Timer and Warming Drawer.

Sequence Programming takes precedence over any non- sequenced cook function. For example, if an untimed Bake function is in process and a sequence program is started, the untimed Bake function will be canceled, and the program sequence will start.

All steps of a sequenced program must be programmed with a stop time. If a stop time is not entered for a step in the sequence program, and the FIRST/NEXT STEP pad is pressed, three tones will sound.

To Program the First Step of the Sequence:

1.Press FIRST/NEXT STEP. “PROGRAM” and “STEP” will appear on the display. A flashing “1” will also appear on the display, indicating that step 1 is being programmed.

2.Choose the desired cook function by pressing any cook function key.

3.Press START TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to begin.

If START TIME is not pressed, then the sequence of cook functions will begin immediately once programming is complete and START is pressed.

The display will show either the time of day (if start time was not programmed) or the start time (if same was programmed), but with a flashing colon. “Stop” and “Time” will also appear on the display.

4.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to stop.

To Program Next Steps of the Sequence:

1.Press FIRST/NEXT STEP. “PROGRAM” and “STEP” will appear on the display. The number of the steps being programmed will flash.

“START” and “TIME will appear on the display.

2.Choose the desired cook function by pressing any cook function key.

3.Press TEMP “up” or “down” arrow pad (if desired) to select temperature.

4.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to select stop time.

5.Press START to begin sequence.

6.Press CANCEL at any time to clear program and to stop program.

To Review/Modify Programmed Sequence:

If program steps are partially or completely programmed, yet the sequence has not been started, the programmed cook functions can be reviewed.

1.Press REVIEW STEPS. Step 1 will appear in the display. Subsequent presses of REVIEW STEPS will cause display of programmed steps in order.

“STEP” and “RECALL” will appear on the display. The number of the displayed step will flash. A recalled step will remain lit on the display for 5 minutes if no further action is taken.

2.If fewer than four steps have been programmed, press REVIEW STEPS repeatedly until the last programmed step is displayed, then press FIRST/NEXT STEP if it is desired to program an additional step.

While a step is recalled, a cook function pad can be used to change the function, or the TEMPERATURE “up” or “down” arrow pad can be used to change the set temperature.

START TIME, when used with the HR or MIN “up” or “down” arrow pads, can be used to change, add or delete a delayed start. STOP TIME can be used to change the stop time.

Changing the stop time of a step will automatically change the start times and stop times of all subsequent programmed cook functions.

3.After Review/Modification of the programmed sequence is complete, press START to begin sequence.

To Modify Sequence Programming:

1.Press UNDO.

The last step of the sequence will be canceled, and the step prior to the canceled sequence will show on the display for either review or modification.

If the programmed sequence has not been started, see “To Program Next Steps of the Sequence” section to program a step to replace the canceled cook function.

14

Page 13 Page 15
Page 14
Image 14
Whirlpool GR475LXL, GR458LXL, GR465LXL, GR445LXL, GR440LXL, GR460LXL manual Sequence Programming
Page 13 Page 15

GR460LXL, GR440LXL, GR445LXL, GR475LXL, GR465LXL specifications

The Whirlpool GR458LXL, GR465LXL, GR475LXL, GR445LXL, and GR440LXL are part of a premium lineup of gas ranges designed to meet the culinary needs of modern households. Each model delivers powerful performance, advanced features, and a sleek aesthetic that fits seamlessly into any kitchen décor.

One of the standout features of these ranges is the multi-burner system, which includes multiple high-output burners capable of reaching high temperatures quickly. This design allows for versatile cooking methods, from rapid boiling to gentle simmering, ensuring that home chefs can execute a wide range of recipes with precision.

The GR465LXL and GR475LXL models come equipped with a powerful convection oven that ensures even baking and roasting. Convection technology utilizes a fan to circulate hot air throughout the oven, which minimizes cooking times and enhances flavor. Additionally, these models feature self-cleaning capabilities, making maintenance much easier for busy families.

In terms of design, the stainless steel finish not only adds elegance but also ensures durability and resistance to fingerprints and scratches. The ergonomic control knobs are strategically placed for ease of use, allowing for precise temperature adjustments while cooking. Large oven windows and internal lights provide complete visibility during the cooking process, ensuring that dishes are perfectly cooked.

Additionally, many models feature a built-in broiler and an optional warming drawer, which offer even more flexibility for meal preparation. The GR440LXL, for instance, is praised for its extensive storage capacity, ideal for storing pots and pans, while maintaining a compact footprint.

Safety features are also a key consideration in these models, with features such as a flame failure device, which automatically shuts off the gas supply if the flame goes out. This provides peace of mind for families with small children and pets.

The integration of advanced technologies, such as smart oven controls, allows users to remotely monitor and control their cooking processes through smartphone applications. This connectivity is particularly beneficial for those who have busy lifestyles and need to manage cooking times effectively.

In summary, the Whirlpool GR458LXL, GR465LXL, GR475LXL, GR445LXL, and GR440LXL gas ranges are emblematic of quality and performance. With a combination of powerful cooking capabilities, convenient features, and stylish design, these ranges are perfect for anyone looking to elevate their cooking experience.
Top Page Image Contents