Whirlpool L-63 Removing the Belt and the Drum, Replacing the Front Support Rollers and Shafts

Removing the Belt and the Drum

1.Remove the front panel.

2.Reach underneath drum and behind motor to locate idler pulley. Push idler pulley to left to release drum belt tension. Remove the belt from the motor pulley. (Fig. 41)

3.Remove the drum and belt from the cabinet. (Fig. 42)

Fig. 41 Fig. 42

Replacing the Front Support Rollers and Shafts

1.Remove the front panel.

2.Remove the tri-ring and the support rollers. (Fig. 43) Using a 9/16’’ open end wrench, remove the support roller shaft. (Front support rollers are right-hand thread.)

3.Attach the new front support rollers and shafts.

Replacing the Grille Assembly

1. Open dryer door and remove the lint screen. Fig. 43

2.Remove the toe panel.

3.Remove the two (2) screws attaching the grill assembly to the front panel and remove the grill assembly. (Fig. 44)

Fig. 44

20