Operatinginstructions
The drawings in this book may vary slightly from your washer model. They are designed to show the different features of all the models covered by this book. NOTE: Your model may not include all the features shown.
Startingyourwasher
Be sure to measure and add detergent, then place a sorted load in the washer before
1. Select a load size
9 Position the Load Size Selector at the setting that describes the size of load you want to wash.
l
l
The selector can be set anywhere on or between EX SMALL (a few items) and EX LARGE (a full load).
To change the water level after the washer has started to fill, slide the selector to RESET then to the desired water level.
NOTE: Use the EX LARGE water level ror best permanent press results.
2. Touch a temperature selection
l
l
l
Match the water temperature to the type of fabric and soils being washed.
The top temperature is the wash selection and the bottom temperature is the rinse selection.
An indicator shows which temperature has been selected.
NOTE: Use warm wash water with the PERMANENT PRESS or KNITS/ GENTLE Cycles.
For heavily soiled permanent press or knit clothes, presoak before washing in warm water.
ALWAYS use cold rinse water for permanent press fabrics.
