II
4.To replace grease filters, slide filter In the frame slot on the front of the openlng.
Rush filter upward and push to the rear to lock into place.
8. Slide a new charcoal fflter Into place. The filter should rest at the angle shown.
5.To replace charcoal filter: remove the vent cover mounting screws.
6.Tip the cover forward, then Ilft out to remove.
9.Slide the bottom of the vent cover into place. Rush the top until it snaps into place. Replace the mounting screws.
10. Turn the power back on at the main power supply
7.Llft the back of the charcoal filter. Slide the filter straight out.
11. DO not operate the hood without the filters In place.
20
