Whirlpool MH6100XY manual CDUd dQWll, Cooking at Lower Cook Powers, Changing the Cooking Time

m.a

2. Touch COOK.

3.Touch Number Pads for cooklng time you want.

m*.

4. Touch START.

CDUd dQWll

The COOK Indicator Light will come on and the Display will show four 0’s.

The display will show the numbers YOU touched In the order you touched them. The example shows 1minute,

30 seconds.

The oven will automatically cook at HIGH Cook Power.

The COOK Indicator Light will stay on to show that fhe oven is cooking in the cycle.

The Display counts down the time to show how much cooklng time is left.

When the cooklng tlme ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeplng by opening the door or by touching CANCEL.) “End” will remain on the Display and a remlnder tone will sound every 60 seconds (to remind you that food Is left In the oven) unfll the door Is opened or CANCEL Is touched. The Display will then show the tlme of day.

Changing the Cooking Time

Cooking time can be changed any time before touching STARTor during the cycle:

1.Touch COOK.

2.Touch numbers for the new ttme.

3.Touch START.

Cook will continue cooking for the new time.

Cooking at Lower Cook Powers

For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower the cooking. Each Number Pad also stands for a different percentage of Cook Power. Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or

percentage (lo%, 50%, 80%. etc.).

The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook Power name usually used.

aufomafic		100%	of full	power	HIGH	4	=	40%	of full	power
9	=	90%	of full	power		3	=	30%	of full	power	MEDLOW
8	=	80%	of full	power		2	=	20%	of full	power
7	=	70%	of full power		MED-HIGH	1 =		10% of full power			LOW
6	=	60%	of full	power		0	=	no power		(fan and	light will be offj
5	=	50%	of full	power	MED

8