Using Your Microwave Oven

Continued

When the set time ends, “End”will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End”will remain on the Display and a reminder tone will sound every 30 seconds (to remind you that the Minute Timer has ended) until the door is opened or CANCEL is touched. The Display will then show the time of day.

NOTE: Opening the oven door stops the count- down. Close the door and touch START to continue the timing countdown.

Using delayed stari

The microwave oven can be set to start automati- cally at a later time. Use the Cook 1 cycle at “0” Cook Power to delay the start of the Cook 2 cycle for up to 99 minutes, 99 seconds.

1. Put in food and close the door. (See WARNING on page 29.)

2. Touch COOK 1. The COOK 1 Indicator Light will come on and the Display will show four “0”s.

3. Touch Number Pads for the length of delay you want. The Display will show the numbers you touched in the order you touched them. This example shows 60 minutes (1 hour).

4. Touch COOK POWER. The COOK POWER Indicator Light will come on and the Display witl show “P-HI”.

5. Touch the “0”Number Pad. The Display will show “P-O”.This tells you that the oven will be operating at 0% power.

6. Touch COOK 2. The COOK 2 Indicator Light will -.

come on and the Display will show four “0”s.

7. Touch in the cooking time and Cook Power.

26

Page 28
Image 28
Whirlpool MS2100XW, MS2101XW manual Using delayed stari, Using Your Microwave Oven