Whirlpool MT4110SP manual Full Power Cooking

For example, if you wish to set a 3% minute timing operation touch the following numbered pads in se- quence - 3, 3, 0.

3:30 will appear in the Time Read- out Display.

3.Touch the start/stop pad and the timing begins.

When the start/stop pad is touched a click sound may be heard.

The display will stop counting if the door is opened. To restart Timer, close door and touch start/ stop pad.

At the end of the timing operation an electronic beep will sound for 3 seconds and the correct time-of-day will reappear in the Time Readout Display.

To Stop or Interrupt an

Operation

‘Tostop an operation either touch the start/stop pad or open the oven door. The oven will automat- ically turn off and the magnetron tube will instantly stop producing microwaves whenever the door is opened or the start/stop pad is touched. To resume the operation, close the door and touch the start/ stop pad.

If food is removed from the oven before time lapses on the Time Readout Display, touch the reset pad once lo clear the display of the timing. The correct time-of- day will reappear in the display.

--

Full Power Cooking

Setting the oven to cook at full power is a very simple 3-step operation. Just enter the function [cook l), next enter the cooking time and finally touch the start/stop pad.

The removable glass shelf must always be in place whenever the oven is in use.

If desired, place a cup of water for in- stant tea or coffee in the oven on the glass shelf.

To set the oven for Full Power Cook- ing:

1.Touch the cook 1 pad.

0O:OO will appear in the Time Readout Display.

The Cook 1 indicator light will turn on whenever this function pad is touched.

[-Xi-]

2.Enter the desired cooking time by touching the numbered pads.

For example, if you wish to heat water for 1% minutes (1 minute 30 seconds) touch the following num- bered pads in sequence - 1. 3. 0.

8