Any new ttme sethng made while BUICK DEFROSTIs operating will continue the dehostlng at only 20% of full power.

The best tlme to change the setting is near the end of the QUICK DEFROSTCycle.

l Open the door.

l Check the food with long-tined fork; if center area is hard frozen, set additional time. Remember that standlng ttme Is necessary to complete defrosttng.

l Close the door and touch STARTTo continue the cycle if no additional time is needed. OR...

l Touch in new Instructions for additional defrosting time.

Cooking in more than one cycle at one or more cook powers

For best results, some recipes call for one Cook Power for certain length of time, and another Cook Power for another length of time. Your oven can be set to change from one to another automatlcally

DO THIS...

THIS HAPPENS...

1. Put food in the oven and close

 

the door.

 

3. Touch Number Pads for the cooklng time you want in the first cycle.

- ‘.. . - Ma

4. Touch COOK POWER.(If you want the high Cook Power, skip to step 6.)

I.

.

m

5.Touch a Number Pad for the Cook Power you want In the first cycle.

The COOK 1 Indicator Light

will come on and the Display will show four 0’s.

‘Ihe Display will show the numbers you touched in the order you touched them. This example shows 3 minutes, 25 seconds.

The COOK POWERIndicator Light will come on and the Display will show “P-HI”This. shows the oven is pre- programmed to cook at full IHIGH) power.

The Display will show what you touched. This example shows you touched Number Pad 6 for 60% of full power.

12

Page 12
Image 12
Whirlpool MW1500XW, MWISOIXW manual ‘.. . Ma, Cooking in more than one cycle at one or more cook powers