Zanussi ZM266 manual Connecting the Appliance to the Power Supply

Models: ZM266

1 40
Download 40 pages 38.29 Kb
Page 38
Image 38

INSTALLATION

CONNECTING THE APPLIANCE TO THE POWER SUPPLY

The electrical outlet should be readily accessible so that the unit can be unplugged easily in an emergency.

The socket should not be positioned behind the cupboard.

The best position is above the cupboard, see (A).

When not connecting the power supply cord to position (A) it should be removed from the support clip (see diagram, item 13, on page 4) and routed under the oven.

Connect the appliance to a single phase 230 V/50 Hz alternating current via a correctly installed earth socket.

The socket must be fused with a 10 A fuse.

(A)

The power supply cord may only be replaced by an electrician.

Before installing, tie a piece of string to the power supply cord to facilitate connection to point (A) when the appliance is being installed.

When inserting the appliance into the high-sided cupboard, DO NOT crush the power supply cord.

Do not immerse the power supply cord or plug in water or any other liquid.

ELECTRICAL CONNECTIONS

WARNING:

THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for your socket outlet, you must call your local Zanussi service agent.

36

Page 38
Image 38
Zanussi ZM266 manual Connecting the Appliance to the Power Supply, Power supply cord may only be replaced by an electrician