Using your microwave oven
Microwave oven controls
There are three parts in the control section:
-Dlgltal Display/Clock, and Indicator Lights
-Command Pads
-Number Pads
lnstructlons for each control are covered on the followlng pages. Read them carefully.
When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 6), the Display again shows all 8’s, It means your electricity was off for a while. Reset the Clock.
Dlgttal display/clock and indicator
When you are not using the micro- wave oven, this is an accurate digital clock. When you are using the micro- wave oven, it dis- plays time settings and indicator lights.
Command pads
Touch Command Pads to tell the microwave oven what to do and In what order. A few examples:
- CLOCK SETtells the oven you are golng to set the clock.
- STARTtells the oven to start.
See page 6 for information on the tone you hear when touching any pad.
Each Command Pad (except START,CANCEL, and CLOCK SET] lights an lndlcator Light when you touch the Command Pad.
While the oven iS running, an Indicator Light (Or lights) will be on to show what the oven is doing.
Number pads
Pads to tell it...