Whirlpool MW3600XW manual count, Using AUTO SET, Changing cook power, down, Do This, This Happens

	The COOK 1 and COOK POWER
	Indicator Lights will stay on to show
	that the oven is cooking in the first
6. Touch START.	cycle at a Cook Power other than
	high

count	The Display Counts down the ttme to
down
	show how much cooking time IS left
	in the first cycle
	For 2 ot every 10 seconds. the Display
	will show the Cook Power you
	selected

When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.] “End” will remain on the Dis- play and a reminder tone will sound

every 30 seconds until the door is

BEEP@JEEPBEEPopened or CANCEL is touched. The Display will then show the time of day.

Changing cook power

The Cook Power can be changed any time before touching STARTor during the cycle.

. Touch COOK POWER.

l Touch a number for the new Cook Power.

l Touch START.The cycle will cook at the new Cook Power for the original time.

l

l

OR..

Touch COOK POWER twice if you want to change a lower Cook Power to HIGH. Touch START.

Using AUTO SET

Auto Set provides ten preset times. One to nine minutes at HIGH cook power can be set

by touching AUTO SETand the corresponding number pad l-9. This provides a short-cut method for setting commonly used cooking times.

The AUTO SETchart included with your microwave oven and the AUTO SETguide on the inner door panel helps you cook various food items without having to look up the cooking times.

A preset time of 2 minutes, 30 seconds at HIGH cook power is available by touching just the AUTO SETpad. The time may be changed to any time from O-99 minutes, O-99 seconds allowing you to store your favorite cooking time and Cook Power, or to pre-program the oven for someone else to cook an already prepared dish at a later time. See page 11for instructions.

DO THIS... THIS HAPPENS...

1. Pui food In the oven and close the door.

continued on next page

9