Using Your Microwave Oven
Continued
1. Touch CLOCK SET. The Display will show a “0” and the colon will start to flash. The first Number Pad must be touched within 5 seconds or the Display will go blank. If the Display goes blank, touch CLOCK SET again and continue.
2. Touch Number Pads for the correct time of day. The Display will show what numbers you touched in the order you touched them. This example shows 3:25.
3. Touch START. The colon will stop flashing. The Clock is set.
If you have touched in an incorrect time, such as 12:65, “Err”will show on the Display. Touch CLOCK SET and start over.
NOTE: To &the clock, touch CLOCK SET. The current time will show on the Display and the colon will flash. Continue to set the clock as shown above.
10
