Using your microwave oven
Microwave oven controls
There are three parts in the control section:
Instructions for each control are covered on the following pages Read them carefully.
When you first plug in the oven, the Display will show 88:88. If, after you set the Clock (page 6) the Display again shows all 8’s, it means your elec- tricity was off for a whrle. Reset the Clock.
Digital display/clock and indicator lights
When you are not using the microwave oven, this is an accu- rate digital clock. When you are using the microwave oven, this displays time settings and shows
you what Number Pads you touched.
Command pads
Touch Command
Pads to tell the micro-
wave oven what to Adofewandexamples:in what order.
to set the clock.
-STARTtells the oven to start. See page 13 for information
on the tone you hear when touching any pad.
Each Command Pad (except STARTand CANCEL) iights an Indicator Light on the digital display.
The Indicator Light comes on when you touch the Command Pad.
While the oven is running, an Indicator Light (or lights will be on to show what the oven is doing.
Once you’ve touched a Command Pad to tell the oven what you want it to do, you’ll touch Number Pads to tell it...
- a time,
-a food temperature
5