Whirlpool RF199LXH warranty Example for 41⁄2-hour cycle, Example for 230 start time

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS (CONT.)

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE

HR MIN

CLEAN

TIME

(example for 41⁄2-hour cycle)

3. Press DELAY START TIME. PRESS YOU SEE

DELAY START TIME

CLEAN

STARTTIME

4.Set the start time.

Press the “up” (s) or “down” (t) pad(s) until the desired start time shows on the display. The oven will automatically come up with the stop time by adding the set cleaning time to the set start time.

PRESS YOU SEE

HR MIN

CLEAN

STARTTIME

(example for 2:30 start time)

5. Press START/ENTER.	PRESS	YOU SEE
	START
	ENTER		ON
	5 SEC	DELAY		CLEAN

6.After the Self-Cleaning cycle starts:

The door will lock as soon as the oven starts to heat up.

YOU SEE

HEATON TIMED

LOCKED CLEAN TIME

7. After the Self-Cleaning cycle ends:	YOU SEE
LOCKED goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.

CLEAN

30