Whirlpool RF199LXH Removing The Oven Door, To remove, To replace, Caring For Your Range, pin hole

Models: RF199LXH

1 40
Download 40 pages 42.47 Kb
Page 34
Image 34
REMOVING THE OVEN DOOR

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR

For normal use of your range, you do not need to

Door removal

Door stop clip

remove the door. However, if you find it necessary

to remove the door, follow the instructions in this

pin hole

 

section.

 

 

NOTE: The oven door is heavy.

Before removing the door:

1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.

2. Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch porcelain.

3. Repeat procedure for other door stop clip.

Range
Hinge
Front frame
hanger
hinge slot

To remove:

1.Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while the door

is removed from the range.

3.Grasp the door on the sides with your fingers on Door removal the front of the door and

your thumbs on the inside surface.

2.Carefully close the door until it rests against the door removal pins.

4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot.

To replace:

NOTE: The door removal pins you inserted must still be in both hinges.

1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

34

Page 34
Image 34
Whirlpool RF199LXH Removing The Oven Door, To remove, To replace, Caring For Your Range, Door removal, Door stop clip