Adjusting

the Oven

Temperature

Control

 

 

Does your oven seem hotter or colder than your old oven? The temperature

of your old

oven may have shifted gradually

without you noticing the change.

Your new oven is properly

adjusted to provide

accurate

temperatures.

But when

comparing

to your old oven, the new design

may give

you different

results.

If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:

1.Pull the Oven Temperature Control Knob straight off.

NOTCHESTOOTH

3.To lower the temperature, move the tooth a notch closer to LO. Each notch equals about IOE (5°C).

2.Loosen the locking screws inside the control knob. Note the posi- tion of the notches.

TOOTHNOTCHES

4.To raise the temperature, move the tooth a notch closer to HI. Each notch equals about 1O’;F(5°C).

Tighten the locking screws and replace the control knob.

8

Page 8
Image 8
Whirlpool RF3000XV manual Adjusting Oven Temperature Control