Whirlpool RF302BXE Storage Drawer, Removing the storage drawer, Replacing the storage drawer

Models: RF3020XE RF302BXE

1 32
Download 32 pages 20.97 Kb
Page 18
Image 18

USING YOUR RANGE

THE STORAGE DRAWER

You can remove the storage drawer to make it easier to clean under your range and to make sure the anti-tip floor bracket is installed. Be careful when handling the drawer.

Removing the storage drawer:

1.Empty the drawer before you remove it. Pull the drawer straight out to the first stop. (The stops are small, round objects formed in the slide rail. They keep the drawer from sliding all the way out.) Then lift the front of the drawer and pull it out to the second stop.

2.Lift the back of the drawer slightly and slide it all the way out.

Replacing the storage drawer:

1. Fit the ends of the drawer slide rails into the drawer guides on both sides of the opening. Also, be sure the lower guide is fitted onto the lower slide rail.

2. Lift the front of the drawer and push it in until the metal stops on the drawer slide rails clear the drawer guides. Then slide the drawer closed.

Lower slide rail (inside drawer

opening) Upper drawer guides

(on inside walls)

Drawer slide rail

Lower drawer guide

18

Page 18
Image 18
Whirlpool RF302BXE Storage Drawer, Removing the storage drawer, Replacing the storage drawer, Opening Upper drawer guides