Replacing
l
l
Burn, Elecfrlcal Shock and Flre Hazard
Make sure all surface units are OFF before replaclng surface units and reflector bowls. Fallure to do so can result In burns or elecfrlcal shock.
Do not line the reflector bowls wlfh foil. Fire or electrical shock could resutf.
1.Turn off all surface units.
3.Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the receptacle.
1.Line up openings in the reflector bowl with the surface unit recep- tacle and the element hold down clip
4.When terminal is pushed into the receptacle as far as it will go, push down the edge of the surface unit opposite the receptacle. The ele- ment hold down clip will keep the surface unit from moving around.
NOTE: Reflector bowls reflect heat back to fhe ufenslls on fhe surface unlfs. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl gets dlscolored, some of fhe utensils may not be flat enough, or some may be too large for fhe surface unit. In either case, some of the heat that’s meant to go info or around a utensil goes down and heats the reflector bowl. Thls extra heat can discolor lf. See Cooking Guide for further information.
17
