Whirlpool RF327PXV manual Solid Element Surface Units

Solid Element Surface Units

Burn and Electrical Shock Hazard

Solid element surface units do not glow red when hot. Make sure all controls are OFF and the range is COOL before cleaning. Failure to do so can result in burns or electrical shock.

1. Turn off all surface units.

3.IMPORTANT: After cleaning,

apply a thin coat of salt-free oil to the CCCL surface units, then heat 3-5 minutes, It may still smoke slightly when heated. If surface units have dark spots caused by grease and food, the oil treatment will improve their appearance

but not eliminate the spots. NOTE: Optional ElectrolE dressing can be applied to the surface units to improve their appearance.

2.For best results, wipe off surface units with a damp soft cloth and soapy water after each use. Burned-on food may be removed with a soapy scouring pad. The red spot in the center of the sur- face unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

4.The stainless steel trim rings will gradually yellow from the heat of the surface units and pans. This is normal. The yellowing can be removed by using stainless steel cleaner or Cook Top Polishing Creme on the trim rings.

To obtain order information for Cook Top Polishing Creme (Part No. 814009) or Electrol@ dressing (Part No. 814030), write to:

Whirlpool Corporation

Attention:	Customer Service Dept.
1900 Whirlpool Drive
LaPorte,	IN 46305	15