OVEN LIGHT OVEN TEMPERATURE OVEN SURFACE UNIT
SWITCH CONTROL /SELECTOR /INDICATOR
I I
LOCK CLEAN OVEN SIGNAL RIGHT REAR RIGHT FRONT
LIGHT LIGHT LIGHT CONTROL KNOB CONTROL KNOB
Using the surface units Control knobs must be pushed in
betore turning them to a setting. They
can be set anywhere between HI
and OFF.
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal Light
One of the signal lights will glow
when a surface unit is on.
Until you get used to the settings, use the following as a guide. For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI to start Use MED-HI Use MED Use MED-LO
foods cook- to hold a for gravy, to keep food
ing; to bring rapid boil; to puddings cooking after
liquids to a fry chicken and icing; to starting it
boil. or pancakes. cook large on a higher
amounts of setting.
vegetables.
CAUTION: The use of the HI setltng for long perfods of time
can damage surface units and discolor chrome trim rlngS.
Start cooking on HI and turn control down to continue
cooklng.
Use LO to
keep food
warm until
ready to
serve. Set the
heat higher
or lower
within the LO
band to keep
food at the
temperature
you want. I