Samsung SP-S4243 manual Memorizing the Channels, Selecting the Video Signal-source, English-19

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels.

This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system).

T V		Channel
	Antenna	: Air	√
	Auto Program		√
	Channel Manager		√
	Name		√
	Fine Tune		√
	Signal Strength		√
	† More

Move	Enter		Return
T V	Channel
Antenna :
		Air
Auto Program		Cable
Channel Manager
Name
Fine Tune
Signal Strength

†More

Move Enter Return

1.Press the MENU button to display the menu.

Press the … or † button to select “Channel”, then press the ENTER button.

2.Press the ENTER button select “Antenna”.

Press the … or † button to select “Air” or “Cable”, then press the ENTER button. Press the EXIT button to exit.

Storing Channels in Memory (Automatic Method)

T V		Channel
	Antenna	: Air	√
	Auto Program		√
	Channel Manager		√
	Name		√
	Fine Tune		√
	Signal Strength		√
	† More

	Move	Enter	Return
T V		Auto Program
Select the antennas to memorize.
	Air		Start
	Cable		Start
	Air + Cable		Start
	Move	Enter	Return
T V		Auto Program
	Select the cable system.
	STD
	HRC
	IRC
	Move	Enter	Return
	Auto Program
Auto Program in progress.
		Cable Channel 67
	Stop
	Enter		Return

1.Press the MENU button to display the menu.

Press the … or † button to select “Channel”, then press the ENTER button.

2.Press the … or † button to select “Auto Program”, then press the ENTER button.

3.Press the … or † button to select the antenna connection, then press the ENTER button.

➢Air: “Air” antenna signal.

Cable: “Cable” antenna signal.

Air+Cable: “Air” and “Cable” antenna signals.

➢If the antenna is connected to ANT 1 IN (CABLE), select “Cable” and if it is connected to ANT 2 IN (AIR), select “Air”.

➢If both ANT 1 IN and ANT 2 IN are connected, select the “Air + Cable”.

4.Select the correct signal source (STD, HRC, and IRC) by pressing the … or † button, then press the ENTER button.

➢STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected.

5.The TV begins memorizing all available stations.

Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit.

➢The TV must be connected to an antenna in order to receive digital TV signals.

Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.

➢• All available DTV and analog channels are automatically stored in memory.

• It takes approximately 3 to 10 minutes to memorize channels.

Press the AUTO PROG. button on the remote control to bring up the Auto Program menu.

English-19