CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

To replace:

NOTE: The door removal pins you inserted must still be in both sides of the door.

1. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

2.

Rest the hinge hanger so that it is flat (at the

 

Remove door

 

bottom of the hinge hanger on the bottom of the

 

removal pin

3.

front frame slot).

 

 

 

 

 

Position the door with the hinge hanger slots

Oven door

 

 

 

 

4.

almost parallel to the front frame.

 

 

 

Range

Push up and in until the hinge hanger slots

 

 

 

 

 

 

become fastened to the range. Lower the door

 

 

 

 

Hinge

 

and rotate it slightly from the front to the back

 

 

 

 

hanger

 

until the slots are fully fastened. The hinge

 

Up

 

 

 

 

hanger will be close to the bottom of the front

 

 

 

Hinge

 

frame slot.

 

 

 

 

 

 

 

 

 

hanger

5.

Pull door open about halfway and remove the

 

 

 

 

 

 

 

 

flat

 

door removal pins. Save door removal pins for

 

 

 

 

 

 

In

 

 

 

 

future use.

 

 

 

 

6.

 

 

 

Front frame

Close the door.

 

 

 

 

 

 

slot bottom

 

 

 

 

 

37

Page 37
Image 37
Whirlpool RF385PXE, RF386PXE manual To replace