Whirlpool RF390PXP manual units, Unit Indicators, Signal, light, Surface, Using the surface

OVEN LIGHT	OVEN TEMPERATURE	OVEN	SURFACE UNIT
SWITCH	CO-NTROL	/SELECTOR	IfjDlCATOR

LOCK	‘CLEAN	‘OVEN	RIGHT REAR	RIGHT FRONT
LIGHT	LIGHT	SIGNAL LIGHT	CONTROL KNOB	CONTROL KNOB

Using the surface	units
f	1	Surface	Unit Indicators
		The solid dot in the surface unit
		indicator shows which surface unit
		is turned	on by that knob.
		Signal	light
I	I	One of the signal lights will glow
		when a surface unit is on.

comrol Knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.

Use	HI to start		Use MED-HI
foods		cook-	to hold		a
ing;	to	bring	rapid		boil; to
liquids		to a	fry	chicken
boil.			or	pancakes.

Use MED			Use MED-LO
for gravy,			to keep	food
puddings			cooking	after
and	icing;	to	starting	it
cook	large		on a higher
amounts		of	setting.
vegetables.

Use LO to keep food warm until ready to serve. Set the heat higher or lower within the LO

CAUTION: The use of the HI setting for long periods of time
can damage surface units and discolor chrome Mm rfngs.
Start cooklng on HI and turn control down to continue
---I-L--
rrrn...w.
c	j

band to keep food at the temperature

you want.

5