Caring For Your Range
Continued
1. Lift the edge of the unit opposite the receptacle, just enough to clear the element hold down clip, reflector bowl and trim ring.
2. Pull the surface unit straight away from the receptacle.
3. Lift out the reflector bowl and trim ring. See Cleaning tips” on page 25 for cleaning Instructions.
Replacing
Burn, Electrical Shock and
Fire Hazard
l Make sure all surface units are OFF before replacing surface units and reflector bowls. Failure to do so can result in burns or electrical shock.
l Do not line the reflector bowls with foil. Fire or electrical shock could result.
1. Line up openings in the reflector bowl and notches In the trim ring with the surface unrt receplacle and the element hold down clip.
2. Hold the surface unit as level as pos- sible wrth the terminal just started into the receptacle. Push the surface unit terminal into the receptacle.
18
