Whirlpool RF391PXW CaringForYourRange, Control panel and knobs, Surface units and reflector bowls

CaringForYourRange

Burn and Electrical Shock Hazard

Make sure ail controls are OFF and the range is cool before cleaning. Failure to do so can re- suit in burns or electrical shock.

Control panel and knobs

1. Turn control knobs to the OFF position.

2. Pull control knobs and buttons straight off.

3. Use warm soapy water or spray glass cleaner, and a soft cloth, to wipe the control panel. Rinse and wipe dry.

4. Wash control knobs and buttons in warm soapy water. Rinse well and dry. Do not soak.

5. Replace control knobs and buttons by pushing them firmly into place.

NOTE: When cleaning, never use steel wool, abrasives, or commercial oven cleaners which may damage the finish. After cleaning, make sure all control knobs point to the OFF position. Make sure you have not turned oven ON when replacing buttons. If oven has been turned on, push Oven-Off button.

Surface units and reflector bowls

Removing

Burn and Electrical Shock Hazard Make sure ail surface units are OFF before removing surface units and reflector bowls. Failure to do so can result in burns or electrical shock.

17