OperatingInstructions
Startingyour air conditioner
l
l
l
Electrical Shock Hazard
Plug unit only into grounded electrical outlet.
Do not use an extension cord.
Do not operate unit with front removed.
Fallure to follow the above precautions could result in electrkal shock or personal injury.
1.Set the Exhaust Vent Control to CLOSED for maximum cooling or heating.
2. Set the Selector to the desired setting.
COOL ...............................for cooling room air HEAT ...*...........................for heating room air FAN ONLY ..................for circulating room air when no cooling or heating is desired
NOTE: This product is not designed to be used as a primary heat source. It is intended for supplemental heating only.
3. Set the Fan Control to the desired setting.
...................for maximum cooling or heating !ED ...................for normal cooling or heating LO .....................................for sleeping comfort
4.Turn the Thermostat Control to desired setting. You can adjust the air conditioner’s cooling or heating performance by resetting the Thermostat Control toward COLDER for more cooling. Turn toward WARMER for more heating. You will need to experiment to find the setting which suits you best.
NOTE: If you turn your air conditioner off, or if the compressor turns off when lowering the Thermo- stat Control, wait at least three minutes before turning it back on or you may blow a fuse or trip a circuit breaker.
3
