Electrical Shock Hazard
Disconnect power before making electrical connections.
Connect ground wire to green ground screw in terminal box.
Failure to do so can result in death or electrical shock.
ground
, , a
n Connect the white and black wires of the power supply cable to the white and black leads in the range hood with
Connect the power supply ground wire to the green ground screw inside the range hood terminal box.
Use caulking to seal wire opening. Replace terminal box cover.
Use & Care
Information
IOPERATION OF RANGE HOOD
For best results, turn range hood fan on at beginning of cooking and allow it to run until all smoke and odors are removed from room.
To operate fan:
Press fan control to turn fan on and off and adjust fan speed. Speed may be increased or decreased anytime during range hood operation.
To operate light:
Press light control to turn light on or off. Light may be turned to off or on anytime during range hood operation.
1 CARE OF RANGE HOOD1
II
Filter/light lens
For best results, remove and clean often.
II 1
To remove filter/light lens:
Pull firmly on filter tab to remove filter/light lens from range hood.
To clean filter/light lens:
Place filter/light lens in dishwasher or hot sudsy water to clean.
Check filter periodically. It should be replaced when it appears saturated or clogged. A new filter assembly, Part No. 883149, is available from your dealer.
To reinstall filter/light lens:
Place edge of filter/light lens in opening so that right side is above flange and tab faces downward. Press filter/light lens into position.
Fan motor
Every three years lubricate each motor bearing with a few drops of oil to help prolong motor life. Clean exterior of motor with a damp cloth and
Exterior surfaces
Clean the range hood with a mild detergent and soft cloth. Do Not use abrasive cleansers or steel wool pads.
light
Do not use bulb larger than 60 watts in light socket.
Light bulb is not included.
If range hood
does not operate...
Check that the circuit breaker is not tripped or the house fuse blown.
If you need
assistance...
Call the Whirlpool Consumer Assistance Center telephone number. Dial
and talk with one of our trained
consultants. The consultant can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recommend a qualified service company
in your area.
If you prefer, write to:
Consumer Assistance Representative Whirlpool Corporation
2000 North
Benton Harbor, Ml
Please include a daytime phone number in your correspondence.
If you need service...
Whirlpool has a nationwide network of authorized Whirlpool service companies. Whirlpool service technicians are trained to fulfill the product warranty and provide
assistance”) or look in your telephone
.,.. -
directory Yellow Pages under:
.
-See: Whirlpool Appliances or Authorized Whirlpool Service (Example: XYZ Service Co.)
. WASHING MACHINES & DRYERS, SERVICE & REPAIR
-See: Whirlpool Appliances or Authorized Whirlpool Service (Example: XYZ Service Co.)
If you need FSP@
replacement parts...
FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a
replacement part for your WHIRLPOOL@
appliance. FSP replacement parts will fit right and work right, because they are made to the same exacting specifications used to build every new WHIRLPOOL appliance.
To locate FSP replacement parts in your area, refer to ‘If you need service” or call the Whirlpool Consumer Assistance Center number in ‘If you need assistance.”
“Whenasking for help or service:
Please provide a detailed description of
the problem, your appliance’s complete model and serial numbers and the purchase date. This information will help us respond properly to your request.
Panel E
