OPERATION AND CARE OF UNIT

FAN AND LIGHT CONTROL PANEL

FAN:

For best results, turn the fan on at the begrnnrng of cookrng and allow It to run until all smoke and odors are removed from the room.

 

 

 

 

 

 

 

pad The fan will start at the hrghest

 

 

 

 

 

 

 

‘UP ARROW”

and the fan WIII start at

‘\u

2

TO

DECREASE

 

SPEED,

 

 

 

 

 

 

 

 

 

Touch

the

ON

pad

again momentarrly

Each

 

trme

the

 

 

“ON pad

IS touched

and

released.

the

motor

speed

WIII

 

 

decrease

 

If the“ON”

pad

IS continuously

depressed.

the

 

 

speed

~111 be

reduced

to

the

slowest

speed

If

the

“UP

 

 

ARROW”

IS touched

frrst.

use

instruction

No.

3

 

 

 

3.

TO

INCREASE

 

SPEED,

 

 

 

 

 

 

 

 

 

Touch

the

“UP

ARROW”

momentarily

Each

time

the

 

 

“UP ARROW”

IS touched

and

released.

the motor

speed

 

 

WIII

Increase

If

the

“UP

ARROW”

IS

contrnuously

 

de-

 

 

pressed. the speed WIII Increase to Its highest speed.

 

 

4

Speed

may

be

Increased

or

decreased

anytrme

during

 

 

operation

 

 

 

 

 

 

 

 

 

 

 

 

LIGHT:

Do not use bulb larger than 60 Watts

FILTER:

For best results. remove and clean often The filter may be placed In the drshwasher or washed In hot sudsy Water.

EXTERIOR SURFACES:

Clean the range hood with a mild detergent and soft cloth. Do not use abrasive cleansers or soapy steel wool pads

Paye 4

Page 4
Image 4
Whirlpool RH4930XL manual Operation and Care of Unit FAN and Light Control Panel, Filter, Exterior Surfaces