Hold surface unit level when replacing.

Prop up the top with support rod.

Pull to stop. Lift; pull again.

Removing surface units and reflector bowls:

1.First, be sure the Surface Unit Controls are all “OFF” and that the surface units are cool.

2.Lift each surface unit about an inch (2.5 cm) at the edge away from the plug-in (receptacle). Pull the unit straight away from the plug-in. Do not luash surjace units: they will burn themselves clean during normal use.

3.Lift out the reflector bowls.

Replacing reflector bowls and surface units:

1.Be sure the surface unit controls are on “OFF.”

2.Put the reflector bowls back into their places. Make sure you can see the plug-ins (receptacles) for the surface units through the square hole in the side of each bowl.

3.Hold the surface unit level with the prongs (terminals) pointing at the plug-in.

4.With the prongs started in the plug-in, start pushing in on the surface unit. At the same time, lift a little on the side of the surface unit that’s by the plug-in.

5.Make sure the surface-ulllt prongs are pushed into the plug-lrl as far as they will go The surface unit should fit into the reflector bowl and be level.

Cleaning under the cooktop:

To clean the area under the cooktop, lift the front of the cooktop at the center. Raise the swing-up rod to hold it. (Be sure the tip of the rod is in the notch in the cooktop ) Use warm soapy water and a sponge or cloth. Scouring powders or any other abrasive cleaner can scratch the chrome cooktop.

Be careful not to raise the cooktop so high that it touches the control console. And don’t drop it. Dropping the cooktop can damage side panels and surface units.

Removing the storage drawer (use care when handling the drawer): The drawer below your oven is meant to store pots and pans.

Never keep anything in there that will burn or melt.

You may want to remove the drawer for cleaning under the range Pull it straight out until it stops. Use care when handling the drawer. Lift the front and pull some more to get it over the stop. Now slide it out until it stops again Lift the drawer away from the range until it slips out of the guides.

To put it back, fit the side rails at the back of the drawer into both guides on the range. Push it closed while lifting the front to get past the stops.

Page 12 Page 14
Page 13
Image 13
Whirlpool RJE-363P manual
Page 12 Page 14

RJE-363P specifications

The Whirlpool RJE-363P is an innovative refrigerator designed to offer both efficiency and exceptional storage capabilities, catering to modern households’ needs. It successfully combines functionality with a sleek design, making it a valuable addition to any kitchen.

One of the standout features of the RJE-363P is its spacious interior. With multiple shelves and compartments, it provides ample space for groceries, beverages, and leftovers. The adjustable shelves allow users to customize the layout based on their storage needs, accommodating items of various sizes, from large bottles to tall containers.

This refrigerator incorporates advanced cooling technology, ensuring that food stays fresh and retains its nutritional value for longer durations. The Multi Air Flow system distributes cold air evenly throughout the refrigerator, eliminating warm spots and maintaining a consistent temperature across all shelves. This feature is particularly beneficial for preserving fruits, vegetables, and dairy products.

Energy efficiency is a crucial characteristic of the Whirlpool RJE-363P. It is designed to consume less energy while delivering optimal cooling performance, making it an environment-friendly choice. The Energy Star certification indicates that it meets or exceeds energy efficiency standards, providing users with lower electricity bills and contributing to a greener planet.

The RJE-363P also features a modern LED lighting system that illuminates the interior, allowing for easy visibility even in low light conditions. This added convenience means users can locate items quickly, reducing the time spent with the refrigerator door open.

Another notable aspect of the Whirlpool RJE-363P is its user-friendly control panel. The intuitive interface allows users to adjust temperature settings easily and monitor energy consumption. Some models may include advanced features such as a digital temperature display and quick-cooling functions, enhancing user convenience.

In terms of design, the Whirlpool RJE-363P comes in several sleek finishes that can complement various kitchen aesthetics. Its exterior is not only stylish but also easy to clean, ensuring that it maintains its appeal over time.

In summary, the Whirlpool RJE-363P is a refrigerator that excels in storage capacity, energy efficiency, and modern features. With its innovative technologies, customizable storage options, and user-friendly design, it offers everything that contemporary households require in a reliable and stylish appliance.
Top Page Image Contents