PUSH IN and turn to setting.
To bake, turn the Oven Selector Knob to BAKE.
To broil, turn the Oven Selector Knob to
BROIL.
Using the surface unit controls
The Surface Unit Control Knobs must be pushed in before turning them. This helps avoid turning them on accidentally when wiping off the Control Panel. And it helps keep small children from turning them on. You
must push in on them.. .then turn to the setting you want.
A design by each knob tells which unit is turned on by that knob. (For example. [ .] shows that the right front unit.. the one closest to you on your right.. will heat when you push in and turn that knob.)
The knob may be set anywhere between “HI” and “OFF.” As you use your surface units. you will get used to the settings that match your pots. pans and favorite foods the best
As a guide. the setting should cook at about the following heats. HI
MED - To make gravy. puddings and icings: to cook large quan- tities of vegetables.
that you can set the heat higher or lower within the LO band [ ‘4 J to help keep food at the temperature you want
The Signal Light will glow whenever a Surface Unit is on. Be sure this light is off when you have finished cooking.
Using the Oven Controls
Baking:
you set
on during baking to keep the oven at the temperature you set. The Oven Signal Light will glol& when the heating elements are on
NOTE: Do not lock the oven door during baking. If you do. you may not be able to uniock it until the oven has cooled.