Place the microwave oven on the hood shelf on the right hand side of the hood aligning the front and right hand side of the microwave oven with the front and right hand side of the Microshelf Hood.

Use the leveling bolts provided to level shelf hood after weight of the appliance is placed on it. Bolts are provided in the installation package. Screw the bolts into the nuts provided on the lower left and right hand sides of the shelf hood until the unit is level. See Figure 10.

NOTE: The leveling bolts have a g/16” hex head.

CAUTION: THE MICROWAVE OVEN MUST BE LEVEL FROM FRONT TO BACK TO MINIMIZE UTENSILS FROM SLIDING FORWARD WHEN OPENING THE DOOR.

5.Mark the safety bracket hole on the back wall through the center of the slotted hole in the bracket, so it can be attached to the rear wall.

WARNING: THE WEIGHT OF THE MICROWAVE MAY EXCEED YOUR LIFT:NG ABILITY. WE RECOMMEND ASSISTANCE.

6.Remove the microwave oven and drill a 3/16 dia. hole through the back wall in the location marked in step 5 above. If a solid wood stud is behind the wall covering, a l/4” dia. lag bolt will be used to mount the safety bracket to the wall. If no solid stud is found in this location, drill a 7/16 inch dia. hole in the wall and insert a hollow wall expanding anchor bolt.

7.WARNING: THE WEIGHT OF THE

MICROWAVE MAY EXCEED YOUR LIFTING ABILITY. WE RECOMMEND ASSISTANCE.

Place the microwave oven on the hood shelf on the left hand side. Plug the microwave oven into the outlet provided in the top of the shelf hood.

Slide the microwave oven to the right so the right hand side of the microwave oven is aligned with the right hand side of the hood shelf. Install the safety bracket using the safety bracket retaining screw. Before operating the microwave oven, make sure the oven cavity and magnetron area cooling vents will not be restricted.

8.Insert Glass Frame Assembly according to Figure 11.

Figure 11

OPERATION AND CARE OF UNIT

CARE OF FILTERS:

A. ALUMINUM FILER: For greatest efficiency, the permanent type aluminum filter should be removed and cleaned periodically.

TO CLEAN: The filter should be soaked in hot water and detergent, then thoroughly rinsed. The aluminum filter can be cleaned in a dishwasher.

CAUTION: Operate the hood only with the filter in place to prevent grease build up inside the hood.

LIGHTS:

Select two light bulbs up to 60 watts each to achieve desired lighting for cooking. The three position switch provides two levels of lighting.

CARE OF EXTERIOR SURFACES:

Clean with a mild detergent to preserve finish. DO NOT use abrasive cleaners.

Replacement filters and repair parts may be

obtained from Whirlpool Corporation, Parts Distribution Center, LaPorte, Indiana 46350.

Page 5

Page 4 Page 6
Page 5
Image 5
Whirlpool RJH 3330-1 operating instructions Care of Filters, Lights, Care of Exterior Surfaces
Page 4 Page 6

RJH 3330-1 specifications

The Whirlpool RJH 3330-1 is a sophisticated freestanding refrigerator that embodies modern design and advanced technology, making it a standout choice for contemporary kitchens. With a user-centric approach, this model ensures a perfect balance between functionality and aesthetics.

One of the main features of the Whirlpool RJH 3330-1 is its spacious interior. With a total capacity of approximately 336 liters, it provides ample space for storing groceries, beverages, and leftovers. The refrigerator compartment is designed with adjustable shelves, allowing users to customize storage according to their needs. The spacious freezer section also provides ample room for frozen goods, making meal planning and preparation efficient and convenient.

This refrigerator boasts several advanced technologies that enhance its performance. The No Frost system is a notable feature, which eliminates the need for manual defrosting. This technology prevents ice buildup, ensuring optimal airflow and temperature consistency throughout the refrigerator. As a result, food remains fresh for longer periods, ultimately reducing food waste.

Energy efficiency is another key characteristic of the Whirlpool RJH 3330-1. With an impressive energy rating, this model not only helps to lower electricity bills but also contributes positively to the environment. The use of LED lighting further enhances energy savings while providing bright and clear illumination of the interior.

In terms of design, the Whirlpool RJH 3330-1 features a sleek and modern exterior that blends seamlessly with various kitchen decors. The stainless steel finish offers durability and ease of cleaning, while the minimalist handles enhance the appliance's aesthetic appeal.

The cooling system is equipped with advanced temperature controls, allowing users to set optimal temperatures for different food types. This ensures that perishables remain at their best, extending the shelf life of fruits and vegetables.

In conclusion, the Whirlpool RJH 3330-1 combines practicality, efficiency, and style. Its spacious design, energy-saving technologies, and user-friendly features make it an excellent addition to any household. Whether you are a busy family or an individual who values convenience, this refrigerator offers solutions that cater to your modern lifestyle, all while keeping food fresh and organized.
Top Page Image Contents