Whirlpool RS20AKXDN00 Removing the door trim dispenser area, Adjusting the refrigerator shelves

Removing the door trim (dispenser area)

(on some models)

Remove the trim above the dispenser area for easier cleaning.

To remove trim:

1.Remove all items from the shelf.

2.Pull straight up at each end of the trim.

To replace trim:

1.Line up each end of the trim above the trim pocket opening in the door liner wall.

2.Push the trim straight down until it stops.

3.Replace items on the shelf.

Adjusting the refrigerator shelves

Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk, and other heavy food items.

To remove the shelves:

1.Remove items from the shelf.

2.Tilt shelf up at front.

3.Lift shelf up at back.

4.Pull shelf straight out.

To replace the shelves:

1.Guide the rear shelf hooks into the slots in the shelf supports on the back liner wall.

2.	Tilt	front of shelf up	until hooks drop	Glass shelves are heavy. Be careful.
	into	slots.
3.	Lower front of shelf		to a level position.

10

WITH OUESTIONS OR COYNLNTS