Installing it properly 1. Allow ‘15
inch (1.25 cm) space on each
side and at the top of the refrigerator for
ease of installation.
Leveling it 2. If the refrigerator is to be against a wall,
you might want to leave extra space on
the hinge side closest to the wall so the
door can be opened wider.
3. The refrigerator can be flush against
the
wall.
Your refrigerator has 2 front leveling
screws - one on the right and one on the
left. To adjust one or both of these, follow
the directions below.
1.
Remove base grille. (See page 17.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
wise.
4.
Check with level.
5. Replace base grille. (See page
17.)
Right to rake;
left to lower
Use a
screw-
driver to adjust