The water dispenser
Chilled water comes from a tank behind
the meat drawer. It holds approximately
1% quarts (1.5 L).
When the refrigerator is first hooked up,
press the water dispenser bar with a sturdy
glass or jar until you draw and discard 2 to
3 quarts (1.9 to 2.8 L). The water you draw
and discard rinses the tank and pipes.
Allow several hours to chill a new tankful.
NOTE:
The small tray beneath the dis-
penser is designed to evaporate
small
spills. There is no drain in this tray.
Do not
pour water into it.
To dispense water:
1.
Press a
sturdy
glass against the water
dispenser bar.
2. Remove the glass to stop dispensing.
NOTE:
Dispense enough water every week
to maintain a fresh supply.
ke and water
I Using the automatic ice maker
Here are
a
few things you will want to know
about your automatic ice maker:
l
The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically.
UP to shut off the ice maker.
NOTE:
Do not turn ice maker on until it is
connected to the water
supply. Instruc-
tions for ice maker water supply hook-
up are attached to the back of the
refrigerator cabinet.
l
It is normal for ice crescents to be attached
by a comer. They break apart easily.
l
The ice maker will not operate until the
freezer is cold enough to make ice. This
can take overnight.
l
If ice is not being made fast enough and
more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a
day and, if necessary, turn the Freezer
Control toward C.
l
Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such
as
salt from a
maffunctioning softener) can damage the
UP to
stop ke
maker.
it
DOWN to
start ke
maker.
14
WITH QUEITIONO OR COYYENTS