INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

If the ice storage bin is located on the door, remove the temporary shield from underneath the ice storage bin. See “Ice Maker and Storage Bin.”

Remove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

3

Page 3
Image 3
Whirlpool RS22AQXMQ01 Installation Instructions, Unpack the Refrigerator, Location Requirements, Electrical Requirements

RS22AQXMQ01 specifications

The Whirlpool RS22AQXMQ01 is a sleek and efficient refrigerator designed to meet the needs of modern households. With its stylish exterior, the refrigerator combines functionality with an elegant appearance perfect for any kitchen décor. One of the standout features of this model is its generous storage capacity, offering 22 cubic feet of space, which makes it suitable for families or those who love to stock up on groceries.

This refrigerator is equipped with advanced cooling technologies that ensure food stays fresher for longer. The Adaptive Defrost feature works by monitoring the compressor run time and defrosting only when necessary. This not only saves energy but also helps maintain optimal food preservation. Additionally, the Whirlpool RS22AQXMQ01 features a Temperature Management System, which utilizes electronic controls to maintain consistent temperatures throughout the refrigerator and freezer.

An interior water dispenser provides quick access to refreshing, chilled water without opening the fridge door, promoting energy efficiency. This convenient feature is designed for easy refills and helps to keep the interior organized by minimizing spills and clutter. The refrigerator also comes with an Ice Maker, adding convenience for those who regularly entertain guests or enjoy cold beverages.

Another key characteristic is the Flexi-Slide Bin, which allows for adjustable storage options. This innovative feature enables users to slide the bin under the freezer shelf, creating additional space for taller items in the refrigerator area. The white finish interior is designed for easy cleaning, and the shelving system allows for customizable arrangement of items, enhancing accessibility.

Moreover, the Whirlpool RS22AQXMQ01 is energy-efficient, ensuring it meets various energy standards to help reduce monthly electricity costs. The model operates quietly, thanks to the technologically advanced compressor, making it a pleasant addition to any living space.

In summary, the Whirlpool RS22AQXMQ01 is a versatile and efficient refrigerator that offers a blend of convenience, modern technology, and ample storage capacity, making it an ideal choice for contemporary households. Its thoughtful features and sleek design enhance both functionality and aesthetics in the kitchen.