Whirlpool RS6606XY If You Need Assistance, Before cal ing for assistance, Possible, Solution

If You Need Assistance

Or Sewice

This section is design led to help you save the cost of a service call. Part 1 of this section outlines possible problems, tt eir causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our Consumer Assistance Center for help or calling for service, please provide a detailed description of the problem, your appliance’s complete model and serial nur lbers and the purchase date. (See page 2.) This information will help us respond properly to your request.

1. Before cal ing for assistance . ..

Performance probler is often result from little things you can find and fix without tools of any kind. Please check the chart belo v for problems you can fix. It could save you the cost of a service call.

	PROBLEM			POSSIBLE				CAUSE
Nothing		will		The unit	is not		wired		into a live
operate				circuit with		proper		voltage.
				A household fuse has blown or a
				circuit breaker			has	tripped.
The	oven will		not	You have not turned					the Oven
operate				Selector	to BAKE			or BROIL.
				You have set a delayed start
				time.
				You have not turned the Oven
				Temperature Control Knob to a
				temperature		setting.
				You have not set the automatic
				MEALTIMERTM			clock		correctly.
				You have not set the automatic
				MEALTIMER		clock’s			Stop or
				Stat-l Time Knobs at the correct
				time of day.
				-
The	surface		unit!;	A household		fuse		has blown or a
will	not	operate		circuit breaker			has	tripped.
				You have not plugged in surface
				units all	the	way.
				You are not setting the control
				knobs correctly.
Control		knob(s)		You are	not	pushing			in before
will	not	turn		turning.

SOLUTION

Wire the unit into a live circuit with proper voltage. (See Installation Instructions.)

Replace household fuse or reset circuit breaker.

Turn the Oven Selector to the desired setting.

Wait for the start time to be reached.

Turn the Oven Temperature Control to the desired setting.

Set the MEALTIMER clock correctly. (See “Using the automatic MEALTIMER’” clock” on page 15.)

If a delay start or stop is not desired, the Stop and Start Time Knobs must be turned to the correct time of day. Turn knobs till they pop out.

Replace household fuse or reset circuit breaker.

Plug surface units in all the way. (See “Replacing” on page 22.)

Push control knobs in before turning to a setting.

Push...control knob(s) in before turning to a sening.

continued on next page

25