4.Put food in the oven. Note: Oven racks, walls and door will be hot.
During baking, the elements WIII turn on and off to keep the oven temperature at the setting The Oven Signal Light will turn on and off with the elements.
The top element heats during
baking, but does not turn red.
5.When baking is done, turn both the Oven Temperature Control and the Oven Selector to OFF
Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your nottclng the change Your new oven is properly adjusted to provide accurate temperatures, But when compared to your old oven, the new design may give you different results
If after using the oven for a period of time. you are not satisfied with the temperature settings, they can be a usted by following these steps.
OFF
Pull the Oven | Temperature | Control | . Loosen the | locking | screw. Note |
Knob straight | off. |
| the position | of the | notches. |
3.To lower the temperature,
move a notch closer to LO. Each notch equals about 10 F (5 C].
10
4.To raise the temperature, move a notch closer to HI. Each notch equals about 10 F (5 C).
Tighten the locking screw
and replace the control knob.