4.When the terminal is pushed into the recep- tacle as far as ii will go, push down the edge of the surface unit opposite the receptacle. The element
NOTE: Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl gets discolored, some of your utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go into or around a utensil goes down and heats the reflector bowl. This extra heat can discolor it.
Removing the oven window
(model RS6755XY)
If your oven has an oven window instead of the black glass door, you can remove the outer glass and frame for cleaning. Do not take apart a black glass door.
To remove the outer window:
1.Turn off all controls. With the door closed, remove the screws from the top of the outer window frame.
2.Slightly tip the window and frame out from the top.
3.With both hands, lift up on both sides of the frame.
To replace the outer window:
1.Fit the bottom tabs of the frame into the bottom of the window opening.
2.Push the top of the frame info place while pushing down.
3.Replace the screws.
33
