Installing it properly
1.Allow 3 inches (7.5 cm) between overhead cabinets and refrigerator top.
2.Allow at least 1 inch (2.5 cm) between the refrigerator condenser on the back and the wall.
3.Allow % inch (1.25 cm) on each side of the refrigerator for ease of installation.
4.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
5.Level your refrigerator.
Leveling it
Your fefrigerator has 2 front, adjustable rollers to prevent rocking on uneven floors.
To adjust rollers:
1.Roll refrigerator into position.
2.Adjust rollers by turning the leveling screws, located at the front of the base. l Turn clockwise to raise.
l Turn counterclockwise to lower. NOTE: Rollers are adjusted correctly when the refrigerator no longer rocks when the doors are opened or closed.
3.Repeat this procedure whenever the refrigerator is moved.
NOTE: If you want the doors to close easier, use the rollers to raise the front of the refrigerator slightly.
I | I | Use | a screw- |
1I | driver | to adjust | |
|
|
Roller
;/yr v
\
Leveling screw
H Raise
View of roller with hinge in place
Leveling screw
7