Before Using Your
Refrigerator
In This | Section |
| Page |
| Page |
|
|
|
| ||
Cleaning | R | ..m | 5 | lnstalllng lt properly | ......6 |
Plugglng It In ..........................................6 Leveling It ...............................................6
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to a power source, install it and level it.
Cleaning it
Removing packaging materials
Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.
To remove any remaining glue:
l Rub briskly with your thumb to make a ball, then remove.
OR
l Soak area with liquid handdishwashing detergent before removing glue as above. Do not use sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners. These can damage the material. See ‘Important Safety Instructions” on
page 3.
NOTE: Do not remove any permanent instruction labels inside your refrigerator. Do not remove the Tech Sheet fastened under the refrigerator at the front.
Cleaning it before use
After removing all packaging materials, clean your refrigerator before using it, if necessary. See cleaning instructions on pages
Plugging it in
Recommended Grounding Method
A 115 Volt AC, 60 Hz., 15 or 20 ampere fused and properly grounded electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.
See Electrical Requirements and Ground- ing Instructions Sheet in your Literature Package.
&prong grounding type wall receptacle
