Installing it properly
1.Allow 3 inches (7.5 cm) between overhead cabinets and refrigerator top.
2.Allow at least 1 inch (2.5 cm) between the refrigerator condenser on the back and the wall.
3.Allow % inch (1.25 cm) on each side of the refrigerator for ease of installation.
4.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
Leveling it
Make sure the refrigerator is level for efficient operation.
To level refrigerator:
1.Keep the 4 bolts that held the refrigerator in the shipping crate. They are the leveling legs.
2.Screw these bolts all the way into the bolt holes on the bottom comers of the refrigerator.
3.Adjust each leg so that the refrigerator does not rock.
4.Slide the refrigerator into place.
5.Place a level on top of the refrigerator - first
l
l
Turn a leg clockwise to raise the comer.
Turn a leg counterclockwise to lower the corner.
6.Check the refrigerator with the level again. Repeat Step 5 until the refrigerator is level.
