Model RTl8DK and RTl8HD
The meat drawer and cover can be removed for cleaning or moved to another shelf, if desired. Remove the meat drawer first.
To remove the meat drawer:
1.Slide the drawer straight out to the stop.
2.Lift the front.
3.Slide drawer out the rest of the way.
4.Replace in reverse order.
To remove the cover:
1.Remove the meat drawer.
2.Tilt front of cover up.
3.Pull cover up and out.
To replace the cover:
1.Fit bottom notches of cover over rear and center cross bars of shelf.
2.Lower cover into place.
3.Replace the meat drawer.
Removing the crispers
To remove the crispers:
1.Slide the crisper straight out to the stop.
2.Lii the front.
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the cover:
1.For some models: Push up glass insert from the bottom, then slide it out with both hands.
2.Lift front of cover frame.
3.Pull cover frame up and out.
4.Remove metal cover support.
To replace the cover:
1.Replace metal cover support on wall supports in front section of cabinet.
2.Fit back corners of cover frame into notch supports on walls of refrigerator, then lower front onto metal cover support.
3.For some models: Slide back of glass insert into cover frame. Then lower front to level position.
Lift the front,
then the back.
Pull out tx stop, lift the front
and pull again.
and crisper cover
Pull out to the
Remove the
Lift front of
12
