6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄ in. drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connecting to Refrigerator

1.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help prevent damage to the tubing when the refrigerator is pushed back against the wall.

2.Turn shutoff valve ON.

3.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

1.

Tube Clamp

3.

Compression Nut

2.

Copper Tubing

4.

Valve Inlet

4.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄ in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

5.Plug in refrigerator or reconnect power.

Refrigerator Doors: Removing,

Reversing (optional) and Replacing

TOOLS NEEDED: ⁵⁄₁₆ in. hex-head socket wrench, No. 2 Phillips screwdriver, flat-head screwdriver, ⁵⁄₁₆ in. open-end wrench, flat 2 in. putty knife.

IMPORTANT:

■Before you begin, turn the refrigerator control OFF and unplug refrigerator or disconnect power. Remove food and adjustable door or utility bins from doors.

■If you only want to remove and replace the doors, see the “Door and Hinge Removal” and “Door and Hinge Replacement” sections.

Door and Hinge Removal

⁵⁄₁₆” Hex-Head Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Open refrigerator door and remove base grille from the bottom front of the refrigerator (see Base Grille graphic).

3.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Door and Hinge Replacement.”

6

Page 5 Page 7
Page 6
Image 6
Whirlpool RT21LMXKQ00 manual Connecting to Refrigerator, Door and Hinge Removal
Page 5 Page 7

RT21LMXKQ00 specifications

The Whirlpool RT21LMXKQ00 is a versatile and efficient refrigerator designed to meet the needs of modern households. With its sleek exterior and user-friendly features, this refrigerator stands out as a reliable kitchen appliance.

One of the most notable features of the Whirlpool RT21LMXKQ00 is its generous storage capacity. With 21 cubic feet of space, it offers ample room for groceries, beverages, and leftovers, making it ideal for families and individuals alike. The adjustable shelves allow users to customize their storage layout, accommodating items of various sizes while maximizing the available space.

The refrigerator is equipped with a frost-free defrost system, eliminating the need for manual defrosting and ensuring consistent temperature maintenance. This technology helps keep food fresh while reducing the risk of freezer burn, providing peace of mind for users.

Energy efficiency is another key aspect of the Whirlpool RT21LMXKQ00. It features an ENERGY STAR certification, meaning it meets stringent energy consumption standards. This not only helps save on electricity bills but also contributes to a more sustainable environment.

The interior is designed with convenience in mind. It includes spill-proof glass shelves that prevent messes from spreading and ensure easy cleanup. Additionally, the crisper bins are designed to keep fruits and vegetables fresh by controlling humidity levels, further enhancing food preservation.

Another significant characteristic of this refrigerator is its temperature management system. The interior temperature can be easily adjusted to suit various food storage needs, ensuring that everything from dairy products to meats is kept at the optimal temperature for freshness.

The Whirlpool RT21LMXKQ00 also features a sophisticated door seal system that helps maintain internal temperatures. The well-insulated design prevents cold air from escaping, which is essential for energy efficiency and food safety.

Overall, the Whirlpool RT21LMXKQ00 is a well-rounded refrigerator that combines modern design with practicality. Its spacious interior, energy-saving features, and advanced food preservation technologies make it a smart choice for any kitchen. Whether you are restocking groceries or organizing leftover meals, this refrigerator provides the flexibility and reliability that today’s consumers expect.
Top Page Image Contents