Whirlpool RUD0800EB installation instructions Drain Hose and Check Valve, ‘i&90’ FLOOR

Drain Hose and Check Valve

The drain hose of your dishwasher is equipped with a factory-installed check valve. If removal of the drain hose is necessary, follow these instructions for reassembly.

Pump Housing

	(4) Drain Port
(3) Drain	(1) Check Valve

1. Push the Check Valve (1) onto the Pump Housing Drain Port (4) making sure the letters “TOP” are showing on top. This position locates the valve such that the slit end is perpendicular to the floor.

1 I I

(4) Drain Port

2. Push the Drain Hose (3) and Clamp (2) assembly over the Drain Port (4) and Check Valve

(1). Fasten the Clamp (2) securely.

‘i&90’ FLOOR

	'1‘	,'4 \
	.,
;,:
/I	//	I

11