Whirlpool SERIES 920 Understanding the status indicators, Washing, Water Heating, Rinsing, Drying

To lock controls:

• Press and hold Air Dry (about 5 seconds) until the Controls Locked indicator glows.

AIR DRY

To unlock controls:

• Press and hold Air Dry (about 5 seconds) until the Controls Locked indicator turns off.

CONTROLS LOCKED

The Controls Locked feature lets you lock the control pads. When the controls are locked,

you cannot start the dishwasher.

WATER

HEATING

Controls Locked

SETTING THE CONTROLS

Understanding the status indicators

Washing

The Washing	indicator glows at the start of
		the first fill of any cycle
WASHING		(except Rinse Only) and
		remains on until the end
		of the main wash.

Water Heating

The Water Heating indicator glows when- ever water is heated during a cycle.

Rinsing

The Rinsing indicator glows during the last two rinses of all cycles.

RINSING

Drying

The Drying indicator glows during the

	drying portion of each
DRYING	cycle – even if you
	select Air Dry. It turns
	off at the end of the

cycle. If dishes are not as dry as you expected when using Air Dry, either allow longer drying times (overnight) or do not use Air Dry.

Clean

The Clean indicator glows at the end of a

	cycle to show that the
CLEAN
	load is clean. All other
	indicators turn off. The
	Clean indicator glows until

you open the door or press Cancel/Drain or any other control pad.

20