TROUBLESHOOTING
WHEN SELF CLEANING YOUR OVEN | ||||
- |
|
|
| |
| PROBLEM | CAUSE | ||
|
|
|
| |
| The | •You did not press the start/enter pad. | ||
| will not work | •The door is not closed all the way. | ||
|
| |||
|
|
|
| |
COOKING RESULTS |
|
|
| |
| PROBLEM | CAUSE | ||
|
|
|
|
|
| Cooking results are | •The oven temperature seems too low or too high. See “Adjusting the oven | ||
| not what you expected | temperature control” on page 15 to adjust the oven temperature. | ||
|
| •You did not preheat the oven before baking (if called for in the recipe). | ||
|
| •You are using a pan that is not the correct type or size. Refer to a reliable | ||
|
| cookbook or recipe for the recommended pan type and size. | ||
|
| •There is not enough air space around the pan when baking. Allow 11⁄2 to | ||
|
| 2 inches of air space on all sides of the pan. | ||
|
| •The flame size does not fit the cookware being used. | ||
|
| •When broiling, you have not completely closed the oven door. | ||
|
| •The flow of combustion and/or ventilation air to the range is blocked. Make | ||
|
| sure nothing is blocking the middle front of the backguard. | ||
|
| •The range is not level. (See the Installation Instructions.) | ||
|
|
|
|
|
DISPLAY MESSAGES
PROBLEM | CAUSE |
|
The display is showing | •There has been a power failure. Press the off/cancel pad to clear the display | |
“PF” | if needed. |
|
“F” followed by a number | •Press the off/cancel pad to clear the display. If an “F” code appears again, | |
shows on the display | call for service. (See “If You Need Assistance or Service” on page 32.) |
|
The indicator light(s) | •The function(s) indicated may not be working. Refer to the section in this | |
is flashing | Use and Care Guide discussing the function. If the indicator light(s) keeps | |
| flashing, call for service. (See “If You Need Assistance or Service” on page 32.) |
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 32.
31