Using your range
OVEN TEMP | SURFACE |
CONTOL | BURNER |
\ | INDICATORS |
LEFT FRONT | LEFT REAR | RIGHT FRONT | RIGHT REAR |
CONTROL KNOB | CONTROL KNOB | CONTROL KNOB | CONTROL KNOB |
Using the Surface Burners
This range is equipped with either standing pilots or electronic ignitors. Stand- ing pilots must be lit initially with a match following the directions on page 9. The pilot light will remain lit when the burners are turned oft. To turn a burner on again, just push in and turn the control knob to LITEand the burner will light.
Electronic ignitors automatically light the burners each time they are used.
Surface Burner Indicators
The solid dot in the surface burner indicator shows which surface burner is turned on by that knob.
Control knobs must be pushed in, then turned to LITEposition. On elec- tronic ignitor models, the clicking sound is the ignitor sparking.
After the burner lights, turn the control knob back to a desired setting. The control knob can be set anywhere between HI and OFF. Do not cook with the control in the LITE position.
In Case of a Prolonged Power Failure
Surface burners with electronic ignitors can be manually lighted. Hold a lit match near the burner and horn the control to the LITEposition. After the burner lights, turn the control to the desired setting. Power failures will not affect Stand- ing Pilots.
